Ram Key Fob Tricks

Owning a Ram truck is an experience in itself, offering exceptional power, performance, and convenience. One of the standout features of your Ram truck is the advanced key fob, a small yet powerful gadget designed to make your life easier and your driving experience more enjoyable. This ingenious device does more than lock and unlock your truck; it’s equipped with many features that cater to various aspects of your driving needs.

Accessory Mode and Run Mode

ram key fob

Ever wanted to roll down your windows or control the windshield wipers without turning on the engine? Ram has got you covered. By pressing the remote start button without pressing the brake pedal, you can enter Accessory mode. In this mode, you can access windows, wipers, and other accessories without having to fully start your vehicle.

If you want to access your instrument cluster and climate control system, press the start button an additional time with the key fob present. This will put your truck into Run mode, giving you even more control over its functions.

Remote Start Feature

On a cold winter morning or during sweltering summer days, wouldn’t it be great to get the temperature inside your truck to a comfortable level before getting in? This is possible with the remote start feature on your Ram key fob.

Just press the “x2” circle symbol surrounded by a circular arrow button twice within five seconds while in range of your vehicle. Your engine will run for 15 minutes, allowing you to warm up or cool down the cabin. To shut off the engine remotely, press the button a third time.

Lock and Unlock Features

In addition to locking and unlocking the doors, tailgate, liftgate, swing gate, and trunk of your Ram truck using the key fob buttons, did you know that you can also roll down or roll up windows without fully starting the vehicle?

All you have to do is click the start engine button until it’s in ACC mode. This will allow you to access the window controls and enjoy some fresh air without turning on your truck.

Panic Button Feature

In an emergency or when you need to locate your truck in a crowded parking lot, the panic button feature on your Ram key fob is there to help. By pressing and holding the Panic button (usually depicted by a horn or alarm symbol), your truck’s alarm will sound, and its lights will flash.

This feature not only helps you find your truck but can also deter potential thieves or alert others to potential dangers nearby.

Reprogramming Your Ram Key Fob

Lost your key fob or need to reprogram it? You’re in luck. Here’s a simple method to reprogram your Ram key fob:

  1. Put your vehicle in Run mode on the key fob without pressing the brakes.
  2. Press and hold the Unlock button for 10 seconds, then release.
  3. As you release the Unlock button, press and release the Panic button.
  4. Press the button(s) you want to reprogram and turn off the ignition to end programming.

Remember, if you’re having trouble with this process or need a new key fob, don’t hesitate to contact your local Ram dealership in Angleton, Texas, for assistance.

Starting Your Ram Truck Without a Key Fob

You might be wondering if starting your Ram truck without the key fob is possible. In emergencies, a hidden physical key inside your key fob can be used as a backup. To access this key, find the latch on the backside of the key fob, slide it over, and pull out the key. Now you can use this traditional key to unlock your vehicle and start your engine. To do so, hold the bottom end of the mechanical key against the engine ignition button, press the brakes, and press the button with the key.

Handling a Dead Key Fob Battery

If your Ram key fob battery dies unexpectedly, you still have options. Using the hidden physical key, you can still start your truck as described above. Alternatively, you can replace the key fob battery to get it up and running again. A  new battery and key fob cover  should cost around $40 altogether.

Air Suspension Control

Some Ram trucks come equipped with air suspension systems, which can be controlled using your key fob. By pressing the appropriate button, you can lower or raise the height of your truck depending on your driving needs.

Customize Your Key Fob Settings

Using Ram’s infotainment system, Uconnect, you can customize various settings related to your key fob. These include turning off specific features like passive entry or adjusting the remote start duration. To access these settings, go to the Uconnect main menu > Settings > Doors & Locks > Key Fob options.

In this menu, you can turn off the horn and flashing lights when unlocking the truck or remote starting the engine. You can also change the default for the unlock button to unlock all doors instead of just the driver’s-side door.

Reach Out for Help

If you ever run into issues with your Ram key fob or need assistance in programming, resetting, or replacing it, don’t hesitate to schedule a service appointment at your local dealership. The experts at Yaklin Chrysler Dodge Jeep Ram of Angleton are always ready to help you get the most out of your vehicle.

Get the Most From Your Ram Key Fob

Owning a Ram truck is about embracing the perfect balance between power, performance, and innovative technology. The array of convenient and advanced features that come with your Ram truck enhances your driving experience and sets it apart from other vehicles in its class. As a proud Ram truck owner, it’s essential to familiarize yourself with all the aspects of your truck, including the versatile and feature-packed key fob.

By harnessing the potential of these Ram key fob tricks, you can maximize the convenience and comfort of your driving experience, making every journey more enjoyable and efficient.

 

Image via ramtrucks.com

Posted in New Inventory